projection welding
英 [prəˈdʒekʃn ˈweldɪŋ]
美 [prəˈdʒekʃn ˈweldɪŋ]
凸焊
双语例句
- Vacuum Projection Welding Simulation and Optimizing Design
真空电阻凸焊有限元分析及优化设计 - The gripping device can be installed in the top and bottom electrode tip holders, which makes the combined work pieces spot projection welding once.
在上下电极座可安装夹紧装置，使组合工件一次性点凸焊。 - Quality Monitoring System Based on Virtual Instrument for Reinforced Screen of Projection Welding
基于虚拟仪器的丝网凸焊质量监测系统的研制 - Microstructure and Properties of Loop Projection Welding Joint Between Large-Diameter Screw Nut and Electrogalvanizing Thin Steel Plate
有闭环（插槽）可以套在螺母或螺栓头上的扳手。厚大螺母与镀锌薄钢板环凸焊接头组织与性能 - Furnace Brazing of Silver Bearing Watts to Alloy Cr-Zr-Cu at Conductive Loop in Automatic Projection Welding Machine
自动凸焊机导电回路中银瓦与铬-锆-铜合金的炉中钎焊 - In this paper, a electrical system based on logic chart reliability theory is introduced, which is designed for projection welding machine and is used to weld the mounting panel of refrigerating compressor.
介绍一种基于单调系统逻辑图可靠性分析理论的制冷压缩机安装板专用凸焊机的电气系统。 - Ruby-red and silver-flashing lacquer catches your eyes in first sight. Microstructure and Properties of Loop Projection Welding Joint Between Large-Diameter Screw Nut and Electrogalvanizing Thin Steel Plate
宝红闪银烤漆端庄大方，独创的加厚门板更显厚重。厚大螺母与镀锌薄钢板环凸焊接头组织与性能 - ( resistance) strain gauge tensiometer resolution Vacuum Projection Welding Simulation and Optimizing Design
（电阻）应变式张力计分辩力真空电阻凸焊有限元分析及优化设计 - Based on the result of temperature distribution by the process analysis of projection welding, the heat distortions and the distribution of residual stresses were gained by the analysis of heat stresses in the free constrain condition.
利用凸焊工艺过程分析得到的凸焊焊接温度场分布结果，在自由状态下对模型进行了热应力分析，获得了凸焊焊接热变形和焊后残余应力的分布情况。 - The effect of electromagnetic force on the splash, joint strength and welding process of capacitor discharge projection welding is studied.
研究了焊接过程中焊接电流产生的电磁力对电容储能凸焊喷溅、接头强度及焊接工艺的影响。 - Voltage polarity's influence on projection welding process of phosphorized weldment by 3-phase secondary rectification
电压极性对表面磷化构件三相次级整流凸焊过程的影响 - Design and Study on Pressing and Leading System of Spot and Projection Welding Machince
点（凸）焊机加压导向系统的研究 - Welding Process for Projection Welding Nut
凸焊螺母的焊接工艺研究 - Relation between strength and pitting value of cross wire projection welding
十字丝凸焊强度与下陷量的关系 - Optimizing Projection Welding by Means of Orthogonal Test Study on Optimizing Proportion of the Briquette with Orthogonal Experiments
利用正交试验法优选凸焊工艺采用正交实验法对某型煤优化配比研究 - The factors of influencing strength for cross wire projection welding and for wire itself are studied on the basis of experiments.
在大量试验基础上对十字丝的凸焊强度和对母丝本体强度的影响因素进行了研究，指出下陷量是表征凸焊强度的一个重要指标。 - Projection welding technique for car chair frame production has been imported from B.F. A.
为标致汽车生产座椅骨架，引进了法国B.F。 - The status of design and technological experiment of projection welding seal nut joint is introduced in detail.
详细介绍了凸焊密封螺母接头的设计和工艺试验情况。 - Not only it is fixed with any suspending and stationary spot welding machine, but also it is fixed with any projection welding machine, protable spot welding gun and welding robot.
它不仅可以与悬挂式点焊机、固定式点焊机配套使用，而且还可以与固定式凸焊机、一体化焊机和焊接机器人配套使用。 - Distortion research on projection welding of car door hinge-Part II: residual stresses and distortions analysis of projection welding
轿车车门铰链的焊接变形II.凸焊焊后残余应力及变形分析 - The experimental results show that the technology of nut circular projection welding is superior to that of arc welding.
试验结果表明，螺母环形凸焊工艺优于电弧焊工艺。 - The studies on the projection welding of weld nuts with steel, zinc-plating and aluminium-plating plate
螺母与钢、镀锌和镀铝薄板凸焊的研究 - Design of electrical system for projection welding machine based on logic chart reliability theory
基于逻辑图可靠性理论的凸焊机电气系统设计 - The basic construction, property and features of new pressing and leading system of spot projection welding machince are introduced.
介绍了一种新型的点（凸）焊机滚动加压导向系统的基本结构和设计特点，并将它与原有系统进行比较。 - Effect of Electromagnetic Force on Capacitor Discharge Projection Welding
电磁力对电容储能凸焊的影响 - A Study on Nondestructive Projection Welding Process of Colour Coated Steel Sheet
彩色涂层钢板无损焊接工艺研究&机械冲制凸点电容储能凸焊法 - Design Improvement of the Welding Electrode of Projection welding nut and Application
方形凸焊螺母专用电极的设计改进及应用 - The problem of splash is more serious in capacitor discharge projection welding than in AC welding.
电容储能凸焊的喷溅问题比交流凸焊更为突出，研究影响喷溅发生的因素就显得更为重要。 - As a part of the efforts on distortions analysis of projection welding of car door hinges, a 2D finite element model has been established based on the projection welding of car door hinges.
作为轿车车门铰链凸焊焊接变形研究工作的一部分，根据轿车车门凸焊的具体情况，建立了一个二维有限元凸焊模型。